Nostalgia Air Filter Assemblies
These custom air cleaner assemblies from K&N are designed for use on nostalgia engines. They incorporate our famous K&N Air Filters and combine high air flow with great looks. Available in 4 different styles.
Four Inch Chrome Top Open Sides
Round open style assemblies fit nearly all early model carburetors with 2-3/16" or 2-5/8" flange diameter. Assemblies are 4" in diameter and measure 3" from base to the top of the wing nut.
Single Assembly - 60-0400
3 Complete Assemblies - 60-0403
Single Replacement Element for 60-0400 - E-3120
Four Inch Louvered Chrome Bonnet
Louvered Bonnet assemblies have a 4" outside diameter base with a 2-5/8" flange and 2-3/16" flange adapter. The 4-5/8" outside diameter Bonnet measures 3" total height (the total height is the minimum clearance required above the carburetor flange).
Single Assembly - 60-0500
3 Complete Assemblies - 60-0503
Single Filter - E-3120
Pontiac Tri-Power Air Cleaners - Chrome
Designed for Pontiac 389, 400, 421, and 428 engines with tri-power. Some mounting flange sizes vary by model year. Make sure to measure before ordering.
Single Assembly - 2 5/8" - 60-1331
Single Assembly - 3 1/16" - 60-1340
3 Complete Assemblies - 2 5/8" - 60-1333
One 2 5/8" + Two 3 1/16" Assemblies - 60-1350
Single Replacement Element for all Assemblies - E-3200
Four Inch Finned Aluminum Top Filters
Round one-piece filters are molded into the aluminum base and finned top and have an “as cast” finish that can be painted, polished or left as is. They fit carburetors with a 2 5/8” flange diameter and are held in one place with a setscrew. These filters are 4” in diameter and measure 2 3/4” in length from base of flange to top.
3 Complete Assemblies - 60-0413
Note: These products are legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.