Vehicle Search

search help
Search by Category

Spectre Hose Sleeve Service

Give us a part number for a radiator hose, by-pass hose or heater hose and we will purchase that hose or send us your current hose (preferably a new hose) and Spectre will professionally put a custom braided hose sleeve on it.
Spectre Performance Hose Sleeve Service

How to order:

Option 1: Send us your hose to have it braided

  1. Verify the hose size before sending it to us - Test fit the hose on your engine and make any necessary adjustments to the length, this is important because the hose cannot be trimmed to fit after it is braided. There are no returns on custom braided hoses. Check that the outside diameter of your hose is less than 2.25 inches (for radiator hoses). Typically hoses up to 1.75 inches inside diameter will be less than 2.25 inches outside diameter.
  2. Pick a color for the Magna-Clamps (sold separately) if desired to be install at the same time.
  3. Contact customer service to place your order, once the order has been created, the customer service agent will provide shipping instructions. Please do not send in your hose until the order has been created.
  4. Allow 2 weeks for processing

Option 2: Purchasing a new custom braided hose

  1. Obtain a Gates or Dayco part number for the application to fit your particular engine. Different hose manufacturers have different size and shape hoses for the same year, make, model and engine application. Be sure to supply the correct part number as there are no returns on custom braided hoses.
  2. Verify that the outside diameter of your hose is less than 2.25 inches (for radiator hoses). Typically hoses up to 1.75 inches inside diameter will be less than 2.25 inches outside diameter.
  3. Pick a color for the Magna-Clamps (sold separately) if desired to be install at the same time.
  4. Contact customer service to place your order.
  5. Allow 2-3 weeks for processing